Copyright © Shijiazhuang Naipu Pump Co.,Ltd All Rights Reserved.
The manufacturer of slurry jetting tools will show you the maintenance skills of the slurry linear vibrating screen
The manufacturer of slurry jetting tools tells you that in the mud solids control circulation system, the mud vibrating screen is often used. As the most important essential equipment in the oil drilling fluid solid control system, the vibrating screen plays a very important role in the drilling operation.
The manufacturer of slurry jetting tools tells you that the strong excitation force output by the linear vibrating screen can quickly remove a large amount of solid phase through the efficient linear vibration trajectory, which can effectively remove larger particles in the drilling fluid. As the first-stage purification of drilling fluid, the function of the vibrating screen is to remove larger particles larger than 70 μm from the drilling fluid returned from the wellhead without breaking it, so that the next-level purification equipment can further purify the drilling fluid.
The manufacturer of slurry jetting tools tells you that the performance of the drilling fluid shaker not only directly affects the quality of the first-stage treatment, but also has a great impact on the performance of the lower-stage purification treatment equipment.
The slurry jetting tools manufacturer tells you that the structure and working principle of the commonly used drilling fluid vibrating screen in China are basically the same, that is, the eccentric shaft is driven by the motor to rotate at a high speed, and the eccentric shaft rotates to generate a strong centrifugal force that acts on the elastic vibrator, so that the eccentric shaft is fixed on the frame. The stainless steel screen cloth vibrates at a high frequency to screen out larger cuttings in the drilling fluid. The following is a description of the maintenance skills of the mud linear vibrating screen:
1. In the process of using the drilling fluid vibrating screen, it is best to use multiple vibrating screens alternately, which can not only improve the life of the bearing, but also be very effective for prolonging the service life of the screen and other parts.
2. The manufacturer of slim jetting tools tells you that during the use process, if you find that the drilling fluid has a phenomenon of sticking to the net, you must wash it in time to avoid long-term non-cleaning, which will reduce the life of the vibrating screen.
3. During use, drip butter on the machine every 24 hours. Regularly check the screen box side plate bolts, and if they are loose, tighten them in time.
4. When the screen is stopped, rinse the screen with clean water in time, and use a brush to clean the drilling fluid on the screen and the sand embedded in the mesh.
5. The belt tension is moderate, so that it does not slip and does not produce violent beating. When shutting down, check the tightness of the belt at any time and adjust it in time.
6. The pulleys of the motor and the vibrating shaft are all cast iron parts, and they are connected to the shaft end through a taper sleeve and a key. When loading and unloading, do not hit hard to prevent breaking.
7. When hoisting, it is strictly forbidden to step on and smash the screen, and it is strictly forbidden to store any items on the screen during transportation.
The manufacturer of slurry jetting tools tells you that the drilling fluid vibrating screen has stopped running during the tripping process, and because the drilling fluid has not been circulated for a long time, the viscosity is often as high as 100μ or more. At the same time, the plug at the inlet end of the vibrating screen is closed to prevent the high-viscosity drilling fluid from flowing onto the screen surface and killing the screen. If there is drilling fluid entering the screen due to the lax closure of the insert, the drilling fluid vibrating screen should be rinsed with clean water in time.